- New EU streamlined design
- The whole frame of the press brake adopt integrated welding, and by tempering to eliminate the internal stress
- The press brake frame adopt shot blast to remove rust and sprayed with anti-rust treatment
- The frame is formed by the imported CNC three-dimensional machining center in one process, which ensures the parallelism and verticality of each mounting surface.
- The controller can control the Y1 and Y2 axes (Y1 controls the left cylinder and Y2 controls the right cylinder) to ensure the synchronous movement of the ram
- Quiet speed waiting and fast down, (about 25 decibels), low noise during pressing and return (the pressure in the hydraulic system is the closed loop control of the servo main motor)
- The main oil pump does not apply work under the drive of the servo main motor, and the energy consumption is 60% lower than that of the general CNC press brake machine
- The machine oil temperature is stable, which extending the service life of various components of the hydraulic system
- More technical innovations to ensure the quality of bending, and powerful, easy to operate
- The press brake adopt the latest high-frequency hydraulic control technology, which is faster, more efficient and more stable
- The best parameter ratio, the optimal core configuration, the performance is stable, the operation is more convenient, and the bending of various workpieces in complex shape can be realized
- Hydraulic Valve: HAWE-Hoerbiger/Rexroth
- Oil Pump: VOITH/ECKERLE
- Oil Cylinder: Made in China
- Main Motor: Siemens Normal Motor; Estun/Inovance/Delta Servo Motor
- Grating Ruler: Fagor/GIVI
- Crowning: Motorized Crowning
- Pedal Switch: Roller Type
- Electrics: Schneider
- Clamps: Quick Clamp
- Ball Screw Rod: PMI
- Linear Guide: Zeen/Schneeberger
- Front Support: Steel Type/Support Equiped with Dual Linear Guide/Roller Support
- Backgauge Motor: Estun/Delta
- Rear Finger: Big Finger
- Finger Amount: 2/3/4/6
- Backgauge Axis: 3+1
- Front Protection: Left&Right Guard
- Rear Protection: Simple Rear Guard
- Controller: Delem DA53T
- Main Motor: WNM
- Grating Ruler: Heidenhain
- Clamps: Advanced Quick Clamp/Hydraulic Clamp
- Ball Screw Rod: HIWIN
- Linear Guide: HIWIN
- Backgauge Motor: Yaskawa
- Finger Amount: Customized
- Backgauge Axis: 4+1/6+1/8+1
- Temperature Control Device: Heating Device / Air Cooling Device / Air Conditioner Oil Cooler
- Front Protection: Custom Sheet Metal Guard/Light Curtain Protection/Laser Protection
- Rear Protection: Custom Sheet Metal Guard/Light Curtain Protection
- Controller: Customized
The main mechanical structure of the press brake consists of the frame, column, ram, worktable, the main cylinder and backgauge. The main components are through finite element analysis and optimized design by 3D software to fully guarantee the structural strength and rigidity of each component.
- The foundation of every ADH press brake is a solid, mono-block frame which made from high yield steel. Which means our press brakes will perform accurately and reliably year after year.
- Every press brake frame is tempered.
- We' re so confident in our frames so that we offer a 15-year warranty with our standard machines.
Our WAD series press brake can be equipped with Delem DA52s, DA58T, DA66T controller and Esa S530, S630 controller. The selection of the controller should be based on practical use and budget.
Compared to traditional stepper motors, the advantages of using servo motors include: improve the accuracy to ± 0.01mm, the noise decrease to 25 decibels, reduce energy consumption by 60%, consump 70% less hydraulic oil and 30% higher efficiency.
- Amazing low noise, made of high strength cast iron and unique design for inner noise reduction
- Low sensitivity to oil pollution and assure of long service life
Our press brake machine uses Hoerbiger integrated hydraulic control system that make it more reliable and easy for maintenance.
Our press brake adopt Schneider electrical components. The high quality electric parts can make the machine performing well even the electricity is not stable and customers can easily get the replacement anywhere in the world.
We using the Taiwan PMI ball screw and linear guide to ensure the moving of X-axis with higher accuracy than using rod. And the backgauge adopt timing belt & wheel mechanism which controlled by servo motor instead of step motor. The height of the backgauge finger can be adjusted manually. Totally there're THREE pcs of backgauge fingers for positioning.
- The standard equipped fast clamp will help you replace the top punch in very short time.
- Convenient and time-saving.
- Fast intermediate loading and unloading function to improve work efficiency
Punch & Die
The standard top punch and dual-V bottom die are specially designed for bending sheet metals. More press brake toolings can be selected as per your practical use. Material and HRC47 degree values are marked on it
Germany HAWE valve
Adopt Germany's Hoerbiger integrated structure of oil pump and hydraulic valve to ensure the bending accuracy.
The oil filter filters impurities in the hydraulic fluid to ensure the life of the machine.
Our WAD series CNC press brake will equip with 3 pieces of backgauge fingers with four adjustable range for positioning, with the accuracy of ±0.01mm.
Estun brand servo drive
The motorized crowning system will adjust the parallelism and straightness automatically.
We use the oil cylinder in high quality to ensure the bending pressure.
Open Door power-off Switch
The open door power-off function will be very helpful for the protection purpose.
Standard Front Support Arm
Our standard front support arm is 180° adjustable.
The automatic sheet followers can be equipped on our CNC press brake for getting higher efficiency and labor saving.
The crowning will compensate for the deflection of the worktable during bending process so as to obtain higher working precision.
Front Light Curtain
The front light curtain will be very helpful for protecting the fingers of the operators.
Does not affect the efficiency of the press brake, can completely solve the safety problem.