Official Distributor in Spain ADH Machinery

WC67K Series Press Brake

General Features

  • The entire EU streamlined design, heat treatment frame, high rigidity workbench, optional mechanical compensation device for precise bending.
  • Hydraulic synchronization control and Estun NC programmable logic controller ensure precise repeatability and ease of use.
  • The integrated hydraulic system (Bosch Rexroth, Germany) can quickly and automatically switch to a slow bend.
  • The X-axis and Y-axis are programmed by the NC E21 system to achieve accurate positioning of the inverter.
  • Advanced variable frequency hydraulic control technology, with more stable, and more reliable operation.
  • The optimal parameter ratio and optimal core configuration ensure stable performance and convenient operation.
  • WC67K series press brake equipped with standard single-axis backgauge system (X-axis) and single-axis bending angle system (Y-axis), you can choose to add V-axis compensation function, and select the appropriate mold to easily bend the workpiece with complex shapes.
Column group

STANDARD COMPONENTS

  • Hydraulic Valve: Rexroth
  • Oil Pump: Sunny
  • Oil Cylinder: Made in China
  • Main Motor: Siemens
  • Ball Screw Rod: Zeen
  • Linear Guide: Schneeberger
  • Front Support: Made by ADH
  • Finger Amount: 2/3/4/6
  • Pedal Switch: Simple Emergency Stop Type
  • Front Protection: Side Fence
  • Rear Protection: Warning Tape
  • Toolings: ADH Standard Type
  • Clamps: Blade Connection Plate
  • Electrics: Schneider
  • Controller: Estun E21
  • Backgauge: Normal Type

OPTIONAL

  • Oil Pump: SAEMP/VOITH/ECKERLE
  • Oil Cylinder: Taifeng
  • Main Motor: WNM
  • Ball Screw Rod: HIWIN/PMI
  • Linear Guide: HIWIN
  • Front Support: Steel type support equiped with dual linear guide;
  • Aluminum alloy support without dual linear guide;"
  • Pedal Switch: Roller Support
  • Temperature Control Device: Heating Device/Air Cooling Device
  • Front Protection: Light Curtain/Laser Protection
  • Rear Protection: Light Curtain/Full Protection/Semi-protection
  • Toolings: Customized
  • Convex Table: Manual/Motorized
  • Clamps: Quick Clamp
  • Backgauge: Double Linear Guide Backgauge
Column group

 

 

Column group

Mechanical Structure

The main mechanical structure of the press brake consists of the frame, column, ram, worktable, the main cylinder and backgauge. The main components are through finite element analysis and optimized design by 3D software to fully guarantee the structural strength and rigidity of each component.

Get Quote

Column group

Controller

Adopt Estun's E21 controller which is able to store 40 programs and each program has 25 steps.

Get Quote

Column group

Torque Synchronous Control System

Adopt steel torsion bar synchronization system, the structure is very simple, but the accuracy is very high. At the two ends of the ram, there are two synchronizing devices so that the ram movement is always parallel to the worktable. This structure highlights the effect of balancing motion during operation.

Get Quote

Column group

Main Motor

The motor of our press brake is adopt world famous brand "Siemens", which will not only has low noise during working of the machine but also has longer service life.

Get Quote

Column group

Oil Pump

China Famous Brand SAEMP/ USA Sunny:

  • Amazing low noise, made of high strength cast iron and unique design for inner noise reduction
  • Low sensitivity to oil pollution and assure of long service life

Get Quote

Column group

Hydraulic System

Our press brake machine uses BOSCH-REXROTH integrated hydraulic control system that limits the number of pipe connections, making it more reliable and easy for maintenance.

Get Quote

Column group

Electrical System

Our press brake adopts Schneider electrical components. The high quality electric parts can make the machine performing well even the electricity is not stable and customers can easily get the replacement anywhere in the world.

Get Quote

Column group

Backgauge

We using the Taiwan HIWIN ball screw and rod to ensure the moving of X-axis with high accuracy. And the backgauge adopt timing belt & wheel mechanism which controlled by step motor. The up and down movement of the backgauge finger can be adjusted manually.

Get Quote

Column group

Punch & Die

The WC67K series press brake is equipped with standard top punch and multi-V bottom die for the use in various purposes. More press brake toolings can be selected as per your practical use.

Obtener cotización

Otros componentes

Column group

Backgauge Finger

Generally the press brake will equip two fingers.

Fittings

JS and EMB tube fittings can be selected.

Inverter

Taiwan DELTA inverter will be helpful to ensure the accuracy.

Column group

X-axis Motor

X-axis movement is controlled by step motor.

Fast Clamp

Fast clamp can be used if you need to change the punch frequently.

Front Support

Simple structure and can move left & right in T-slot.

Column group

Pedal Switch

The pedal switch will be used to control the movement of the ram. And there'is emergency stop button on top of it.

Side Safety Guard

For the protection of operators.

Rear Safety Guard

Protect the back side which can't be seen in front.

Column group

Manual Crowning

The crowning will compensate for the deflection of the worktable during bending process so as to obtain higher working precision.

Front Light Curtain

The front light curtain will be very helpful for protecting the fingers of the operators.

Laser Protection

Does not affect the efficiency of the press brake, can completely solve the safety problem.

Contact us

Do you have any doubt?

Contact us